Invincible Smart-Guy System

Nie Minhui was very concerned about Zhang Yunfeng's matter. She was very concerned about the five-axis linkage processing equipment that Zhang Yunfeng had mentioned in the beginning. She had also used some special means to help Zhang Yunfeng purchase a few sets. Zhang Yunfeng's temporary high precision machining center was located inside the factory of Shi Jia Village. A warehouse that was about five thousand square meters in size was lifted up into the air. There were several sets of five-axis joint processing equipment that had just been assembled inside. The warehouse itself had been modified. It was installed with a large central air-conditioning system to stabilize the temperature of the processing center. It had also been installed with large dust-removing equipment, which could basically be dust-free.    

    

When this place was modified, apart from the ventilation channel at the top, there was not a single window left behind, and the entire factory was basically completely sealed. The light outside could not shine in, and there was no sunlight for 24 hours. They had to rely on the cold light source to light up the factory. Inside, they had been running at full speed for several days!    

    

In the past few days, other than some equipment and spare parts, no one else had entered. The person who sent the equipment and spare parts inside was the boss of this place, Zhang Yunfeng.    

    

Inside this factory, the waiter was using high-precision robotic arm and high-precision five-axis joint processing equipment to improve and modify the overall accuracy!    

    

High-precision robotic arm was equivalent to the waiter's arm. He used the five-axis linkage equipment to constantly improve the robotic arm itself. This allowed the robotic arm to have a higher precision. Then, he used a higher precision robotic arm. The processing equipment for the five-axis linkage was thoroughly modified, causing its precision to continuously increase.    

    

When these five-axis linkage equipment had just been transported in, they only represented the highest level in the country. International medium level, but with the continuous improvement of the waiter... Using the technological knowledge of industrial manufacturing, using the mechanical arms with increasingly high precision, in just a few days' time... The precision of these five-axis linkage equipment had already reached the world's first-rate level.    

    

The reason why Zhang Yunfeng was sure that the standards here had already exceeded the first-class level was because he clearly knew. The equipment in this factory had already reached the international first-class level ten years later. Right now, the upgrade of the waiter's precision was still ongoing. Once the higher the forging material was produced, the overall precision and technological level of these equipment would also be greatly improved!    

    

At the same time that the precision was constantly increasing, the waiter used the current equipment. He developed a mechanical arm that was most suitable for his needs, this type of mechanical arm, this type of mechanical arm, this type of mechanical arm, this type of mechanical arm, this type of mechanical arm, this type of mechanical arm, this type of mechanical arm, not only did it have to reach an unprecedented level of precision, but it was also designed to be a moving base. The design of the base was very simple, it was a two-track chassis. He directly ordered the finished product from the production of the discharge robot and then slightly modified it. The modified track could ensure that the base would change to the original position. It was very convenient to move. There was also an automatic coil on top of the chassis, which could automatically release a power cable that was about 100 meters long. In other words, this mechanical arm was no longer a robotic arm that was fixed at a certain location of the production line. It was a simple robot that could move.    

    

Although these robots looked very simple, because they were directly controlled and controlled by the waiter, thus, their execution ability was extremely high, and only the waiter had this kind of artificial intelligence. Only then would they be able to display the true use of these robots!    

    

Similarly, the waiter created five robots himself. These five robots... Basically, they could cover every corner of the factory. If that was the case... Even if no one was there to assist, the waiter could still do whatever he wanted here.    

    

To Zhang Yunfeng, this was too important. He could use the wireless network at any time to let the waiter carry out the secret processing here. And this kind of processing ability was based on the intelligence of the waiter. Even if other people could go, there was no super large artificial intelligence program. It was simply impossible to fully utilize the use of this high precision machining center. But even so, Zhang Yunfeng was still very cautious and kept the secret of this place strictly.    

    

Zhang Yunfeng was the only one who knew about this place. Not even Nie Minhui knew about it. It was a completely enclosed design, all-pervasive surveillance equipment, visual surveillance, thermal surveillance, infrared surveillance. These equipment were quietly installed in every corner of the processing center by the waiter's mechanical arm. No one could avoid the waiter's surveillance. If someone were to quietly approach this place, and Zhang Yunfeng was not there... He could make the waiter stop everything here in an instant, and even... He could even use the fixed and mobile robotic arm here to destroy all the equipment. Of course, this was the last resort.    

    

As for Zhang Yunfeng himself, after the mobile robotic arm was produced, he left the Zhangjiakou and rushed to Chengdu these few days. After completing the automatic modification of the assembly line, the workers in the factory were also given the latest allocation. Because Zhang Yunfeng wanted to expand the production capacity, after most of the production lines were automated, more workers could be put into the necessary parts, such as the installation of the components, monitoring the whole car, and so on. The current number of workers was just enough to meet the requirements.    

    

Although the new engine, the new transmission department, and the new suspension had not yet been produced, Zhang Yunfeng did not want to wait any longer. He was ready to start the production of the assembly line!    

    

In Zhang Yunfeng's opinion, he should first manufacture the vehicle. In this way, once other parts were mass-produced, they could immediately be transported to complete the production line and log off. As for Chengdu's assembly line, it had just been upgraded and could resume production at any time.    

    

Zhang Yunfeng had already chosen three models of cars previously, which were 152.5 million. 25.45 million. 45.7 million. The highest price for the three models was not more than 700 thousand. There was no need to use new materials to manufacture the body of the car. With the current technological strength of this assembly line, adding the normal materials would be enough. Therefore, it now had all the production requirements.    

    

Among these models, Zhang Yunfeng's ability to compete was mainly reflected in: 1. Excellent iconic appearance. 2. The best cost-effective ratio.    

    

Specifically speaking, Zhang Yunfeng had a classic model that could be directly used in the future. In terms of design, it was definitely ahead of time, and it could definitely capture the current consumers. And from the technological aspect of the exterior, the wind resistance coefficient of each model, the streamline design of each model would reduce the air resistance, and increase the pressure on the ground. This was also commonly known as low pressure. Zhang Yunfeng was well aware of all these. There was no need to do any more tests to ensure that the model was created. It was the best one on the market right now.    

    

Apart from that, Zhang Yunfeng's price-performance ratio was his biggest market card. New materials, new technology made engines, a car that guaranteed consumers' access. It was the best car at the same price, but it was also the best car at the same price. The fuel consumption was the lowest, and the maintenance cost was the lowest.    

    

With these two items, it would be enough for Zhang Yunfeng to dominate the market. As for the carbon fiber car, Zhang Yunfeng could not use it on cars below 2 million yuan. After all, his car model had sufficient cost-performance ratio.    

    

The design of the three models had already been imported into the computer by the waiter. Zhang Yunfeng then handed them to the person in charge of the assembly line. These three models had to be completed as soon as possible before entering the mass production process.    

    

For the staff of the assembly line, who had been directly taken over by the Dongchen Automobile from the Volvo, the design of these three models came out. It shocked and amazed everyone. It was the first sigh that came from a person with a normal aesthetic sense! These three models were really too beautiful, be it a van or a van. Whether it was a sports car or a business car, all the derivatives were perfect and impeccable. At least, based on the current global car structure... No one had been able to find out what was wrong with them.    

    

Not only did the model look stunning, but it also took into account the design elements of the air power. It made all the employees believe that as long as the power configuration and price of these three cars were appropriate, it could definitely perform well in the market. With the old brand of "Volvo," it could definitely set off a storm in the automotive industry.    

    

However, Zhang Yunfeng made it very clear that all the cars produced by the Dongchen Automobile would completely abandon the brand of the Volvo. From now on, all the products would be named "Dong Chen," and the English name would be translated, Donson. The logo of the brand had also been personally designed by Zhang Yunfeng.    

    

The logo of the Dongchen Automobile was a circular logo that was the same as that of the public. Inside the circular logo was a large font of the English letter DC, and on the right side of the D, there was an arc. There was also an arc on the left side of the C, and the two arcs were designed to be: the center of the circle was the benchmark, and the left and right sides were completely mirror images. The two arcs were not connected to the circle's length, and the only one that was connected was... It was the vertical line of the D letter. As a result, the two letters of the DC... It was right in the middle of the circle, and the size was just right. It was neither too big nor too small.    

    

After this logo was designed, it immediately submitted the registration and patent. When the Dongchen Automobile staff saw the original Volvo logo in the factory being replaced by this round logo, at first, they were not used to it, but not long after... Everyone also liked the simple logo of Dong Chen, just like the VW logo of the public.    

    

There were models, logo, and interior designs. The engine was waiting for the new materials to be ready before it could be mass produced.    

    

The suspension system was not a big problem. Middle and low-class cars would use the Volvo S60. Middle and high-end cars would use the S80 suspension system as the blueprint to make some changes and upgrade.    

    

As for the transmission system, Zhang Yunfeng had two considerations. As for the hardware, the transmission box was the core problem. As for the software, the driving method and the power distribution system were the most important. However, the change box was not a big problem. For these three models, the highest selling price was not more than 700,000 yuan. Zhang Yunfeng was prepared to make some improvements on the original transmission box. At that time, three types of chassis would be introduced. The manual chassis would be five speeds to match the lowest end of the car. The automatic speed box would also be five speeds to match the low end car. The hand self-integrated speed box would be divided into six speeds and seven speeds. If the hand-in-hand transmission was paired with a high-end car, it would be able to develop a good car worth more than a million dollars in the future. He would then consider whether or not to introduce a high-end transmission.    

    

As for the driving method, low-end predrive, high-end cars... Using an ordinary semi-hour four-wheel drive system, as for the high-end car, a central differential lock would allow it to be a full-time four-wheel drive. Zhang Yunfeng did not intend to spend too much effort on it. He just wanted to make sure that it was standard and proper. As for the consumers who really needed the performance, he would introduce other models for them later.    

    

Just as Zhang Yunfeng was burying his head in Chengdu, Nie Minhui suddenly came to visit.    

    

In Zhang Yunfeng's office, Nie Minhui saw that Zhang Yunfeng was still studying the 3D image of the car in front of the computer. She smiled and asked, "What is it? Is there a problem with the new model?"    

    

"No." Zhang Yunfeng smiled and said, "In the beginning, we only want to introduce three models. The exterior and interior design of these three models have already been determined. I am now thinking about how to give the model a serial number."    

    

Nie Minhui smiled and said, "I don't know about these, but I need to remind you. The number of the model must not be too complicated. The more straightforward the better. Just like the BMW 17 series, it was very intuitive. The off-road vehicle used the X series. The performance car used the M series. The public could see it at a glance. On the contrary, the location of the Mercedes-Benz model was more chaotic. Everyone knew that... It was S series, SLK, CLK, C series, E Series, B Series, G Series. It's a mess. If you're not a veteran fan, you won't be able to differentiate the core differences between each series. "    

    

Zhang Yunfeng nodded and said, "My initial idea is to divide it into four major routes to locate. Divide the model into four parts, namely cars, off-road vehicles, business cars and performance cars. Then divide the car into household vehicles, business vehicles, and luxury cars, each type. Each type starts with a specific letter."    

    

"Wouldn't that be a Mercedes-Benz?" Nie Minhui frowned and shook her head. "It is too messy and not easy to distinguish. Actually, from the way you classify it, it can be seen. The car is the biggest part. If that is the case... Why don't you follow the route of the BMW and take all the cars. The first series is compact, the third series is small cars... The fifth series is large, the sixth series is running, and the seventh series is luxurious."    

    

Zhang Yunfeng thought for a moment and said, "Directly copying the classification of the BMW is not appropriate. There are too many models of the BMW. Actually, each series is a model of the car, with different models. Actually, it's just like different versions, and we can divide them into different models. Instead, it seems very messy. It would be best if you can think of a new way to suit yourself... "    

    

Nie Minhui opened her mouth and said, "Then what about Audi's classification method? A single letter represents the car system and a single number represents the car model. It is also very convenient. "    

    

Zhang Yunfeng's eyes lit up and said, "This is indeed more suitable. Moreover, Audi's model is not many. This kind of classification is simpler and more direct. It is also more convenient to remember."