C184 Multi-axis Linkage Cnc Machine Tool
C184 Multi-axis Linkage Cnc Machine Tool
The cutting of metals, drilling holes, ramming, and so on and so forth were all done through corresponding lathes. Now, in the entire Factory 4447, there were a large number of lathes and a large number of experienced old masters.
However, no matter how skilled these old masters were, they were unable to process parts with higher precision. This was because of the limitations of the lathes themselves.
Any machine processing had to pay attention to an important data. It was processing precision. For example, the processing precision was 1 mm. That was to say, the workpiece was designed to be 10 mm, but when it came out... It could be 9 millimeters, or maybe 11 millimeters.
It could be seen that this error was not small. If the precision of the processing was reduced to 0.1 millimeters, then the result could be 9.9 millimeters, or maybe 10 millimeters. At this time, the precision of the processing would be very high.
Right now, the most urgent thing to solve in the factory was the processing of the high-pressure oil pump. No matter how experienced the experienced teachers worked hard to process the product, the finished product would be... The error was too great. If it was assembled like this, the friction and resistance would be too great because it was too thick. Otherwise, the oil would leak because it was too thin, and it would not be able to be used at all.
After all, civil heavy cards needed to pay attention to the cost of using, and the fuel consumption had to be lowered.
This required Cnc Machine Tool.
No matter how skilled the workers were, as long as they used their own hands to operate it, if they used a computer to control it, then they could exclude artificial factors, and the computer would not make accidental mistakes.
The other side was the multi-axis linkage.
This was the real way to increase the precision of the processing.
A normal piece of work might need to be processed from several directions. Every time it changed the direction of the processing, it would need to be fixed. Every time it changed the fixed position, there would inevitably be an error.
If he could use a few car knives to process from several sides at the same time, this problem could be avoided. If the piece of work did not move during the entire process, there would not be an error every time it moved.
Especially when processing a complex curved surface, only a multi-axis joint processing could be done.
At this time, no matter how skilled the workers were, they would not be able to do it. They had to rely on the computer to control it.
All of this happened along with the development of technology. In the middle of the century, with the development of electronic technology, automatic information processing, data processing, and the emergence of electronic computers... Here. Automatic technology brought about a new concept, using digital signals to control the machine's movement and processing process. It pushed the development of machine tools automation.
At the beginning of the 40s, it was achieved by a small aircraft contractor in the Y Country North Mi'an Company, Parsons. When they were making the framework of the aircraft and turning the helicopter's wing, they used all digital computers to process data on the wing processing path. And... Considering the influence of the diameter of the blade on its processing path, the precision of the processing reached 0.0381 millimeters, reaching the highest level at that time.
More than ten years later, Y Country MIT was on a cubic milling machine. It was equipped with a experimental CNC system and successfully controlled the movement of the three axis at the same time. This Cnc Machine Tool was known as the first Cnc Machine Tool in the world.
Compared to them, the CNC technology in Han Country was not slow. It was almost synchronized with the technology in other countries. It started in the 50s and developed into the first Cnc Machine Tool in 1958.
However, everyone knew the reason. Under that special historical background, how could there be an advanced Cnc Machine Tool appearing!
It was totally following the trend. It lacked understanding of the characteristics and development conditions of the Cnc Machine Tool. Under the circumstances where the quality of the staff was poor, the foundation was weak, and the matching parts did not pass, the crowd rushed up and down again. They had been up and down three times, but because of their poor performance, they could not be used for production and stopped.
Other than announcing that our Cnc Machine Tool was placed on a big satellite when we posted it on the big newspaper, it was simply impossible to carry out actual production.
The domestic Cnc Machine Tool could not be used at all. Imported overseas? On the one hand, it required precious foreign exchange reserves. On the other hand, foreign countries also sealed off their own side. They could not import it at all. Only in the recent few years could they be considered to have eased up. There was a possibility of import.
As long as Qin Guan said it, they would definitely be able to do it. They did not need to worry about it.
At the same time, on the other hand, there was indeed no one in the factory who could operate the Cnc Machine Tool.
Most of the workers in the factory did not have high cultural standards. When they entered the factory in the past, they relied on their relationship, and on a red root. For example, Hee Ribala did not want to come, but was sent in instead.
The operation of the machine tools was taught by the old master. They did not have physical knowledge, so they operated according to the experience taught by the master. After a long time, they became familiar with the machine.
As for the Cnc Machine Tool, that would be troublesome. Without solid physics, mechanical processing and computer skills, there was no need to operate this kind of machine well.
After all, in this era, most people had never seen a computer before. They had never touched the keyboard before.
They had to hire specialized talents. If they did not have them in China, they could only hire them from overseas. Inviting them from overseas was only temporary. They had to develop our technical skills.
"Alright, Qin Guan." Factory Manager Suen decided. "You are in charge of the machine tools. I am in charge of finding skilled workers."
It was impossible for Qin Guan to do everything by himself. Others would definitely not be able to do the lathe. It was still possible to hire a skilled worker at a high price.
"Qin Guan, which day is your marriage arranged?" After finishing the other matters, Factory Manager Suen asked Qin Guan with a smile.
Qin Guan immediately patted his own head. Not good!
After he came back, he had been busy with the factory business and had actually forgotten about his marriage.
"I'll go back and discuss it." Qin Guan said, "Today's meeting, shall we stop here?"
Everyone smiled knowingly. They were thinking of going home to get their wives, right?
Since she had already gotten her marriage certificate, Chen Yutong simply moved to Qin Guan's dormitory openly. The single dormitory was so spacious, much bigger than her own.
However, after Chen Yutong's parents rushed over from afar from the south, Chen Yutong could only obediently return. After all, in the eyes of the older generation, the marriage certificate was just a piece of paper. Only after the official wedding could the bridal chamber be completed.
Next to Qin Guan's dormitory was Xiang Jing's dormitory. Back then, Xiang Jing domineeringly occupied this place. Now, when Chen Yutong's parents came, this dormitory was given to them.
At this moment, the dormitory was very lively. Xiang Jing was carrying the camera and recording.