C382
C382
As for the two types of equipment used by the South River Heavy Iron Company, they were exactly the same as the two types of equipment used by the archer heavy industry that was about to enter the market!
The only difference is that their equipment has been announced to the outside world, while ours is still being further refined and refined according to my requirements!
The call was from Reiko. That's the main point.
I'm familiar with the South River Heavy Bus." This is a listed company, in the past has been engaged in the development and production of heavy cars. It was said that he had worked with the Shaanxi Auto Heavy Card, but somehow, there was no result. Logically speaking, this heavy car also belonged to the heavy industry category, so it wouldn't be too excessive to develop and produce other heavy industry products. But that's the point: while heavy cars and engineering equipment are part of the same heavy industry, they are two different systems that have nothing to do with each other. Heavy vehicles were part of the transport equipment, while cement conveyor pumps were part of the engineering equipment. Transferring any one type to another was a very difficult task for ordinary enterprises. They would never do such a thing! Of course, the only exceptions were those with ripe conditions! The two products were the heavy industry products that the South River Heavy Automobile had announced and promoted. They were actually extremely similar to the two products that Zhang Gong had just finished developing! Leaving aside the appearance of the two products, just the distance between the two products, such as 145 meters and 138 meters, were exactly the same!
Even more importantly, the parallel control mode and the curved arm control mode were exactly the same! One had to know that this parallel and curved arm type column type was something he himself, Zhang Yun, had figured out when he was at the cement paste pump construction site.
It turned out that the products developed by the longbow heavy industry were all cantilever type. But this time, there were a lot of problems during the construction of the twin towers in the transport plaza. Firstly, the twin towers were relatively tall, and required the delivery of cement paste during construction. The traditional product of this long and heavy labor was parallel to the surface, so there was no case of it being transported to the top. This 130-meter long cantilevered dome type cement pump was able to reach a distance of 130 meters from the ground, but its face was less than 60 meters away! Whereas the Twin Towers were both over 150 meters tall, this requirement couldn't be met. Later, after the technical attack on the conveyor pump specially set up two mode control systems, the traction system in the pump nozzle suction, and the conveyor system in the bottom pressure spray to overcome this difficulty, so the crank arm type high-end conveyor pump. In order to protect the green space, regardless of whether it is the developer or the builder, they have made a clear requirement for it. In fact, whether it is the developer or the builder, they are both my industry now, and to put it bluntly, this is what I mean by the requirement. That is, a cement pump car, in a fixed place, to hold the entire Twin Towers. If they were to take up a bit more space, they would either destroy the green area, destroy the primitive ecosystem, or sink into the Redbud River branch that was originally unique to this area! "If you don't destroy the green area and you can't fall into the river, you can only take up an entrance to the Twin Towers and transport the cement slurry there.
If we don't work in a rush, we can solve this problem by sending two of the Twin Towers in turn. However, I have another request. It must be completed within the scheduled time limit! This posed another problem: The same machine must export cement paste to more than two construction sites at the same time!
This topic, let alone the country, was not even available on a global scale!
After the attack, one of Liu Zhiyun's assistants, a technician named Jia Gu, came up with a brilliant idea. He set up the main output port on a main cement mixer, and then set up two parallel output systems that could simultaneously output over two output arms. Of course, this required the following conditions to be met. One was the high power of the output equipment. That's all right, that's all right. Second, there is an adequate supply of raw materials. Because the original machine pump to meet the same port, then each car cement stock is just right. Now, one machine and one pump have to satisfy two ports simultaneously, so the cement stock of this single car is obviously not enough. However, as soon as this problem was solved, it was solved by the other technicians. The most direct method was to install an internal and external replacement system on any of the cement pumps produced by a heavy worker with a long bow. There are only two uses for this system: to receive cement inputs from external systems when necessary, or to inject cement outwards when necessary. The system was easy to produce, because its nature was to make a hole in the cement mixer and to solder a new connection.
In this way, all the problems were solved: one main engineer machine was at the front, sending cement paste to two places with two parallel arms; the main engineer machine's input port was connected to the output port of the second main engineer machine, and the cement guarantee of the first main engineer machine was not easy to resupply and expand because the position of the first main engineer machine was not always good; however, the second main engineer machine was generally in a good position, and could be adequately recharged or constructed in a wide area. What's more, if the second machine still wasn't enough, they could either extend the dedicated transportation pipeline a bit longer, or arrange for the third main engineer machine to be used for subsequent inputs after the second main engineer machine …
If the equipment developed by Bow Long Heavy Industries in the past has solved a problem, that is, the point-to-point transport of flat blocks, then at least three major technical gaps in the world have been filled: the point-to-point transport of vertical blocks, such as the curved arm type long-distance cement conveyor pump; the transports opposite to the point of the flat blocks, such as the parallel long-distance cement conveyer pump; and the associated systems between heavy industry equipment, such as the cement stock of the main equipment, which can be supplied by means of a dedicated delivery pipeline and an input port. It was like when a fireman was fighting a fire, there could only be one fire engine parked near the fire; and when a fire engine ran out of water, it was clear that it was not enough. The firemen would usually connect the water from the following firemen to the first fireman through a hose. They would let the first fireman spray into the firepit! This relational system between heavy industry equipment and fire truck has the same effect!
The products produced by these three technologies will be widely used, especially in field operations. My original intention was to produce a prototype of each of these three technologies, and then patent them and produce them on a large scale after perfecting them in practice. I am sure that these two devices will be more competitive than the first and will further enrich the line of products of Bow Heavy Industries. In other words, with these three proprietary technologies and a few other technologies, the archer would definitely be able to establish his position in the martial arts world.
However, what I didn't expect was that such a strange thing would happen in our Nanwei Province. That Nanhe Heavy Industry's equipment is exactly the same as the equipment we developed!